Easythreed 3d Printer Printing Review UK 2026

Key specifications

Build Volume and Print Size

With a build volume listed at 150 x 150 x 150 mm, this 3D printer is designed for small to medium prints rather than large parts, such as full-size props or big appliance-style components. The usable print size limits how large an item can be in one piece, so larger designs may need splitting and later joining. The easythreed obu1212187277615kf 3d printer supports compact projects, including desk models and quick accessories. The manufacturer also notes a smaller "100 x 100 x 100 mm building size" for one setup, so expectations should be checked as well.

Print Speed and Quality

Print speed and quality are closely tied to how this FDM machine is set up and the type of model it is producing. The easythreed obu1212187277615kf 3d printer is aimed at compact projects rather than high-throughput production, and the manufacturer highlights fast heating alongside a controlled feed system, so start-up waits should be shorter than with slower units. Print quality depends on proper bed levelling and slicer choices, because the platform still needs care even with detachable removal. The easythreed 3d printer 3d review states that prints can be sliced using Easyware, Cura, or Simplify3D, with tuning for sharper details on small prints.

Filament Compatibility

Filament compatibility is mainly determined by what the extruder can handle and how the printer is set up for small, quick parts. For the easythreed obu1212187277615kf 3d printer, the manufacturer lists an extruder temperature up to 230°C, which means it can support common FDM filaments within that limit. A practical way to confirm performance is to select a filament type, set the temperature in the slicer (Easyware, or Cura/Simplify3D) and run a short test cube. If cooling or flow look poor, reduce print speed and adjust retraction.

Build Plate and Levelling

Build plate setup is a key factor for getting parts to stick reliably on the EasyThreed. In the EasyThreed OBU1212187277615KF printer, the platform is detachable, which helps remove finished models but also requires careful re-seating each time. The hotbed needs to be purchased separately, so users should check that the included mounting parts fit correctly. Levelling is best done before every print: power on, follow the on-screen steps, and then start a first-layer test. If adhesion is uneven, adjustment and another attempt are usually needed.

Software and Slicer Compatibility

Even though the EasyThreed model is designed for beginners, its results depend on choosing an appropriate slicer workflow. For the easythreed obu1212187277615kf 3d printer, the maker notes it ships with Easyware, its own slicer software, intended to be simple. It also works with CURA or Simplify3D open-source slicers, which can help users target better output. For easythreed 3d printing easythreed 3d printer 3d uk use, users should set print type to FDM, match filament diameter, and keep build limits within 150 x 150 x 150 mm. File compatibility can vary by slicer version.

Setup and Learning Curve

After picking a slicer workflow, the next step is getting the printer set up so the settings match how it is physically assembled. For the easythreed obu1212187277615kf 3d printer, assembly uses a module design, and beginners can follow the steps on its 2.4-inch touchscreen. The detachable printing platform helps remove finished parts, but the hotbed must be purchased separately. Weighing 1.95 kg, it targets small builds, about 150 x 150 x 150 mm, so expectations should align with that build volume. Learning is supported by the included Easyware slicer, alongside Cura and Simplify3D options, which helps when aiming for easy results at a best price uk level.

Noise and Enclosure

Noise is a key consideration for shared spaces, and the 3D printer is described as "ultra-quiet" due to noise reduction technology during printing. That matters when the printer is used near other people, because FDM machines can be distracting. Overall, the easythreed 3d printer 3d printing easythreed 3d printer 3d pros and cons highlight quieter operation, but limited enclosure information affects expectations.

Cleaning and Maintenance

Cleaning and maintenance help keep an FDM printer consistent. The EasyThreed OBU1212187277615KF includes a detachable printing platform, which can simplify day-to-day model removal. After printing, the hotend should be allowed to cool, then the bed should be wiped and any residue removed using a soft scraper and cloth. Regularly checking the build surface can help reduce stuck parts, although warped or dirty surfaces can still lead to poor adhesion. Periodic inspection of the nozzle and fans is sensible for the easythreed OBU1212187277615KF.

Who Is This 3D Printer For?

Who is the EasyThreed likely to fit best? This FDM 3D printer is aimed at a best 3D printer beginner who wants a small, straightforward machine for learning. The 150 x 150 x 150 mm build volume is designed for small parts, quick prints, and basic practice. Installation uses a module design, while operation is guided by a 2.4-inch touchscreen. A detachable printing platform helps with removing finished models, although the hotbed needs purchasing separately. It also works with Easyware or other slicers, and the quiet printing design makes it suitable for shared spaces, such as homes or classrooms.

Where to Buy in the UK

For buyers in the UK, the EasyThreed OBU1212187277615KF printer is typically available through online electronics and 3D-printing retailers. When checking listings, buyers should confirm the exact model number and the note that the hotbed is purchased separately before checkout. The printer may be found via marketplaces such as Amazon UK, as well as specialised store websites and third-party resellers. When comparing options, shoppers should check what is included, since the hotbed is not supplied. They should also review the build volume, which is 150 x 150 x 150 mm, and any compatibility mentions provided by the seller.