Sunlu Imprimante 3D Kidoodle Printer for Kids Review UK 2026

Key specifications

Build Volume and Print Size

The AnkerMake Kidoodle mini 3D printer offers a build volume of 312 x 312 x 352 mm, positioning it as a compact, enclosed unit while still covering a broad range of beginner-friendly projects. For the ankermake imprimante 3d kidoodle 3d printer for kids, the usable maximum print size is 100 x 100 x 100 mm, so larger designs need to be split. Planning can focus on models, toys and classroom parts that fit within this 100 mm cube, with the surrounding chamber space supporting the unit's enclosed frame and handling.

Print Speed and Quality

With a claimed print speed of up to 600 mm/s, the AnkerMake Kidoodle is designed to reduce waiting time for each project, particularly for smaller models that fit its maximum usable size of 100 x 100 x 100 mm. The ankermake imprimante 3d kidoodle 3d printer for kids 2026 focuses on fast enough output rather than maximum detail. Quality is supported by an anti-clog nozzle and an easy-release PEI build plate, which can help prevent surface defects during removal. That said, the final appearance depends on the chosen model and settings.

Filament Compatibility

Filament compatibility matters because the Kidoodle kit is aimed at beginners and is supplied for a single common workflow. The AnkerMake 3D printer is specified to print PLA, and the starter kit includes 250g PLA (with 2.5kg listed in total). It can work with Cura compatibility, and the app supports Wi-Fi and USB workflows, so users can load standard PLA models easily. Sticking to PLA delivers the most predictable results for first-time learning.

Build Plate and Levelling

Since the Kidoodle is designed as a beginner-friendly, enclosed mini FDM printer, build plate setup and levelling directly affect first-layer adhesion and overall print consistency. The PEI build plate is flexible for quick removal, and the kit includes platform glue and a paper leveling tool. Clean the plate, apply a thin glue layer if desired, then lower the nozzle close to the bed. Adjust the nozzle height until the paper drags with slight resistance, then recheck after warm-up. Consistent results depend on careful, repeatable adjustment.

Software and Slicer Compatibility

Software support matters for the Kidoodle experience because it determines how easily files are prepared and how reliably prints can be started. For the AnkerMake imprimante 3d Kidoodle 3d printer for kids on Amazon, the manufacturer claims Wi-Fi app control plus USB printing, and notes Cura compatibility for slicing. The workflow typically goes like this: choose a model from the app's library, slice it in Cura (or send it via USB), then start the job through the touchscreen.

Setup and Learning Curve

Getting prints started smoothly matters as much as having compatible slicing options, so after choosing files through the Wi-Fi/USB workflow and Cura compatibility, the next focus becomes setup and how quickly new users can learn the printer. The ankermake imprimante 3d kidoodle 3d printer for kids is pre-assembled, so beginners can begin "one-click printing" with less calibration time. A starter kit supports setup, including a 5-inch touchscreen, PLA filament, USB drive, and basic tools such as tweezers and a hex wrench. Users load the PEI build plate, apply platform glue if needed, and use the detachable nozzle for maintenance. Learning is faster due to clear menus, but first prints should be supervised, since maximum size is limited to 100 x 100 x 100 mm.

Noise and Enclosure

With the Kidoodle 3D printer fully enclosed, noise and safety concerns are addressed through physical separation and automatic responses when the door status changes. The enclosed build limits sound spreading into the room, while the door safety lock pauses printing if the enclosure door is opened. The design also reduces nozzle temperature to lower risk for children. In the AnkerMake Imprimante 3D Kidoodle 3D printer for kids pros and cons, the enclosure is a clear advantage, though it can feel restrictive for supervision. Overall, the automatic pause and temperature reduction provide an additional safety layer during use.

Cleaning and Maintenance

Cleaning and maintenance on the AnkerMake Kidoodle is designed to be straightforward, which matters for kids and beginners who may not be used to printer upkeep. The AnkerMake 3D printer for kids uses an anti-clog nozzle with a detachable nozzle, and it includes a flexible PEI build plate to make part removal easier. After each print, it helps to let parts cool, then remove them and wipe dust from the build plate using the included tools if needed. If jams appear, clear them at the nozzle. Regular checks are still necessary because filament residues can build up.

Who Is This 3D Printer For?

The AnkerMake Kidoodle 3D Printer is designed for kids and beginners who want an enclosed, easy-start FDM setup rather than an open, fully manual machine. The Kidoodle printer for kids is suited to classrooms and home makers because it is pre-assembled and built for one-click printing. Its fully enclosed structure pauses automatically and reduces nozzle temperature when the door is opened, helping protect younger users. With a 312 x 312 x 352 mm overall size it suits smaller spaces, but it targets simpler projects, as the listed maximum print size is 100 x 100 x 100 mm.

Where to Buy in the UK

Where can someone buy the AnkerMake Kidoodle 3D printer in the UK, and what should they check before ordering? They can look for listings under phrases such as "ankermake imprimante 3d kidoodle 3d printer for kids uk", including official and large retailer stores. The starter kit includes PLA filament (250 g), a USB drive, and a build plate, but the maximum print size is 100 x 100 x 100 mm. Before placing an order, confirm the enclosure safety lock, Wi-Fi and USB control, and one-click printing support. Also check return and warranty terms, which include 30-day returns and a 1-year key-part warranty.